NEON BULERIAN ECO 6 KW. INSTALLATION AND FIRST OPERATION

Neon Bulerian ECO 20 kW with a cooking surface has a heating capacity to heat spaces up to 200 square meters.

It operates on firewood, wood waste, and paper. Thanks to its 16 convection tubes, its efficiency (Coefficient of Performance) is increased to 80%. All parts are made of 3mm thick heat-resistant steel.

The burning time on a single load can be up to 4-6 hours, depending on the fuel quality. The ash box serves two functions, improving ease of use and air supply regulation. The second air supply control is located at the rear of the chimney inlet, and when the handle is in a vertical position, the damper is fully open.

To switch to the smoldering mode, you need to completely close the ash box and turn the handle on the damper to a horizontal position, which provides a limited air flow, allowing the Bulerian ECO to enter the smoldering mode.

The colossi of the Bulerian ECO are made up of three independent parts that can be pulled out if needed.

The Bulerian has a cooking surface with excellent heat conductivity.

At the beginning of the cooking surface, there are two cooking rings that can be removed if needed to reduce the time it takes for water to boil in a pot.